The Model 298601 Wireless Keypad is a weather-resistant keyless entry station transmitter. Entering a programmable 4-digit access code sends the programmable radio code to the receiver to activate the door or gate operator. The transmitter is powered by a 9-volt battery, has a test/operate indicator, and keys that light during use.
When the battery gets low, the keypad will blink during use to indicate that the battery needs changing.The transmitter is Multi-Code format providing 1,024 possible radio codes. The transmitter will only activate receivers set with the same code programmed into the keypad.The Model 298601 is compatible with 310 MHz Stanley receivers and Model 109950, 302850, and 309013 receivers.
The Model 309013 1-Channel Receiver is designed for use in residential garage door operator applications. Typically the receiver mounts directly to the three terminals on the door operator. An 11-inch wire antenna extends from the receiver.The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate 24-volt AC power transformer.The receiver's exclusive two-way terminal lugs fit under terminal screws or can be used with push-on terminals in remote placement applications using the Model 109206 3-Wire Adapter.The receiver is programmed with a 10-position coding switch.
When a transmitter set to the same code is activated, the receiver's output will activate, triggering the door operator.$ 39.95. The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.
The Model 109950 is a dual frequency receiver. An internal jumper selects either 300MHz or 310MHz operating frequency. The 300MHz frequency is compatible with standard Multi-Code transmitters, the 310MHz frequency is compatible with the Stanley version Multi-Code transmitters. The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC.
A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals. The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.$ 54.95. The Model 302850 2-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception.
The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing.
Stanley Economy 1 4 Hp
An external Model 106603 Remote Whip Antenna can also be used with this receiver. The Model 302850 is a dual frequency receiver. An internal jumper selects either 300MHz or 310MHz operating frequency.
The 300MHz frequency is compatible with standard Multi-Code transmitters, the 310MHz frequency is compatible with the Stanley version Multi-Code transmitters. The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay outputs can switch up to 1 amp @ 30 VAC. 3-foot, 2-conductor wire leads with spade lugs are provided for attachment to the gate operator's radio activation terminals. The receiver is programmed with a 9-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
Transmitter switch #10 selects which receiver channel will activate.$ 69.95. The Model 106603 Remote Whip Antenna is designed as a remote mounted antenna. This antenna is useful when a receiver must be mounted in poor signal reception location such as inside a gate operator case. Remote antennas are also useful in installations where the receiver is located inside a metal building and the transmitters will be activated from outside the building. The antenna has a bracket for mounting the antenna and connects to the Type-F connector on the receiver through a 15-foot coax cable. NOTE: Generally, the higher the antenna is mounted above ground level, the better the radio range will be.$ 28.95. The Model 308911 1-Channel Visor Transmitter is a poratble transmitter designed for automatic door and gate operator applications.This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver.
Free arabic music download. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included.The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same code.The Model 308911 is compatible with 300 MHz Multi-Code receivers and Linear Model 109950 and 302850 receivers.$ 24.95. The Model 412001 2-Channel Visor Transmitter is a portable transmitter designed for automatic door and gate operator applications.This transmitter is a two-channel device. Pressing the left button on the transmitter will send a channel one signal. Pressing the right button on the transmitter will send a channel two signal.
The buttons feature raised dimples for easy, or vision-impaired identification. A visor clip is included. The transmitter is powered by a 9-volt battery and has a test/operate indicator.The transmitter is Multi-Code format with two 10-position coding switches providing 1,024 possible codes for each channel. Independent coding supports activation of a common gate and a private door. The transmitter will only activate receivers set with the same code.$ 24.95.
The Model 308301 2-Channel Key Ring Transmitter is a miniature style transmitter designed for automatic door and gate operator applications.This transmitter is a two-channel device. Pressing the left button on the transmitter will send a channel one signal. Pressing the right button on the transmitter will send a channel two signal. The buttons feature raised dimples for easy, or vision-impaired identification. The transmitter has a red test/operate indicator and is powered by a 12-volt battery.
A molded-in hole in the case is for attaching the transmitter to a key ring.The transmitter is Multi-Code format with two 10-position coding switches providing 1,024 possible codes for each channel. Independent coding supports activation of a common gate and a private door.
The transmitter will only activate receivers set with the same code.$ 29.95. The Model 414001 4-Channel Visor Transmitter is a portable transmitter designed for automatic door and gate operator applications.This transmitter is a four-channel device. Each button activates one of the four channels. The buttons feature raised dimples for easy, or vision-impaired identification. A visor clip is included. The transmitter is powered by a 9-volt battery and has a test/operate indicator.The transmitter is Multi-Code format with two 10-position coding switches providing 512 possible codes for each channel. The transmitter will only activate receivers set with the same code.$ 29.99.
The Model 420001 Wireless Keypad is a weather-resistant keyless entry station transmitter. Entering a programmable 4-digit access code sends the programmable radio code to the receiver to activate the door or gate operator. The transmitter is powered by a 9-volt battery, has a test/operate indicator, and keys that light during use. When the battery gets low, the keypad will blink during use to indicate that the battery needs changing.The transmitter is Multi-Code format providing 1,024 possible radio codes. The transmitter will only activate receivers set with the same code programmed into the keypad.$ 39.95. The Dolphin Wireless Keypad is a weather-resistant keyless entry station transmitter. Entering a programmable 4-digit access code sends the programmable radio code to the receiver to activate the door or gate operator.
It bears the subtitle In the Wake of Gods and introduces to this title a number of innovations, including: new skills and characteristics of Heroes, new types of monsters (8-level), unique creatures (emissaries of God), unprecedented artifacts, deposits, or items. Download hero 3 shadow of death full version. A special addition to the game Heroes of Might and Magic III: Shadow of Death prepared entirely by the fans of this series.
The keypad is powered by a 9-volt battery, with low battery indicator. When the battery gets low, the keypad will blink during use to indicate that the battery needs changing.The keypad has 1,024 possible radio codes.
The keypad will only activate receivers set with the same code programmed into the keypad.$ 39.95. The Model 109020 1-Channel Receiver is designed for use in residential garage door operator applications. Typically the receiver mounts directly to the three terminals on the door operator.
An 11-inch wire antenna extends from the receiver.The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate 24-volt AC power transformer. Remote power accessories available for the Model 109020 include the Model 109201 Wiring Harness and the Model 109207 Wiring Harness. Both models include a plug-in transformer.The receiver's exclusive two-way terminal lugs fit under terminal screws or can be used with push-on terminals in remote placement applications using the Model 109206 3-Wire Adapter.The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is activated, the receiver's output will activate, triggering the door operator.$ 34.99.
The Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector.
If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used.The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.The receiver is programmed with a 10-position coding switch.
When a Multi-Code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.$ 59.99. The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception.
The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.The Model 109950 is a dual frequency receiver. An internal jumper selects either 300MHz or 310MHz operating frequency.
The 300MHz frequency is compatible with standard Multi-Code transmitters, the 310MHz frequency is compatible with the Stanley version Multi-Code transmitters.The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.$ 54.95. The Model 302850 2-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector.
Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.The Model 302850 is a dual frequency receiver. An internal jumper selects either 300MHz or 310MHz operating frequency. The 300MHz frequency is compatible with standard Multi-Code transmitters, the 310MHz frequency is compatible with the Stanley version Multi-Code transmitters.The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay outputs can switch up to 1 amp @ 30 VAC. 3-foot, 2-conductor wire leads with spade lugs are provided for attachment to the gate operator's radio activation terminals.The receiver is programmed with a 9-position coding switch.
When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator. Transmitter switch #10 selects which receiver channel will activate.$ 69.95. The Model 302101 2-Channel Heavy-Duty Gate Receiver is designed for use in gate operator applications. The receiver is housed in a heavy-duty metal cabinet. The cabinet meets NEMA 13 and JIC specifications and features a sealed strain relief bushing for wiring. An 11-inch wire whip antenna is included for local reception.
The whip antenna connects to the receiver's Type-F antenna connector. An external Model 106603 Remote Whip Antenna can also be used with this receiver in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing.The operator supplies 24 volt AC or DC power to the receiver. The two Form C relay outputs can switch up to 1 amp @ 30 VAC.The receiver is programmed with a 10-position coding switch.
When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator. Transmitter switch #10 selects which receiver channel will activate.$ 129.95. The Model 302210 Gate Safety Edge Transmitter is for adding obstacle sensing for motorized gates or barrier arms.
Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method. The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor (a Miller gate edge sensor is recommended).
If an obstacle is encountered, the sensor will present a closed circuit across the connecting wires and the 302210 will transmit a message to the receiver signaling entrapment to the gate operator. The operator then stops or reverses the movement of the gate.The 302210 transmitter is supplied in a weather-resistant, fiberglass box. Its circuit board is coated to prevent moisture damage. The enclosure mounts to the gate, door, or barrier arm through sealed interior mounting screws.$ 95.95. The Model 106603 Remote Whip Antenna is designed as a remote mounted antenna.
This antenna is useful when a receiver must be mounted in poor signal reception location such as inside a gate operator case. Remote antennas are also useful in installations where the receiver is located inside a metal building and the transmitters will be activated from outside the building. The antenna has a bracket for mounting the antenna and connects to the Type-F connector on the receiver through a 15-foot coax cable.NOTE: Generally, the higher the antenna is mounted above ground level, the better the radio range will be.$ 28.95.